Mounting Information:

Flat Surface mounting

This option gives you unlimited flexibility! You will need to provide proper screws/bolts for mounting your Solar Dock Lite to the desired material. Screws and bolts will differ for each need and material being mounted to. We recommend the following mounting methods:

Start by removing the Solar Dock Lite's top (electronics portion) and remove the three screws which secure the universal fitting. Remove the universal fitting.

1. Replace with three suitable screws or bolts for desired application and material.

2. After removing the universal fitting bottom you can slightly sand or scuff the bottom of the clear plastic lens. Use a desired glue for mounting. Note: Glue should be able to bond plastic to your application material.